The best outdoor gas fireplace cover is the one that matches your fire table’s shape and measurements while providing protection suited to your weather. The QH.HOME cover is best for many 29- to 32-inch square pits, while Saking is sized for tables up to 28 inches. Zettum is the rectangular option, and DORAHUA is designed for an upright patio fireplace rather than a tabletop fire pit. Measure the full appliance before choosing a cover.
| Product | Best suited for | Listed size |
|---|---|---|
| QH.HOME Square Cover | Square fire pits from 29 to 32 inches | 32 x 32 x 24 inches |
| Saking Square Cover | Square fire tables up to 28 inches | 28 x 28 x 25 inches |
| Square Fire Pit Cover for 28 Inch Firepit | Smaller square fire pits, subject to fit checks | Up to 32 x 24 inches, per listing |
| DORAHUA Outdoor Fireplace Cover | Upright patio fireplaces | 36 x 25 x 57 inches |
| Zettum Rectangular Cover | Rectangular fire tables from 45 to 48 inches | 48 x 28 x 24 inches |
QH.HOME 32-Inch Square Fire Pit Cover
Best for: Owners of square outdoor gas fire tables measuring about 29 to 32 inches across who want a cover with listed waterproof construction. Its stated dimensions are 32 x 32 x 24 inches, and the product description lists compatibility with several square sizes in that range. Measure the appliance rather than relying only on its nominal size.
The cover uses 600D Oxford fabric, which the listing describes as tear resistant. It also specifies vinyl, PVC coating, and heat-sealed waterproof tape as layers intended to keep rain out. These materials make this option relevant for buyers who prioritize a weather barrier for a square fire pit that remains outdoors.
Why it was selected: It has a clearly stated square fit range and gives material details that make it easier to compare with the other covers. Choose it if your fire table’s length, width, and height fall within the listed dimensions.
Limitation: The 24-inch height may not cover a taller fire table fully. The listing provides no wind-fastening details, so buyers in exposed locations should check whether its fit is secure for their setup.
Saking 28-Inch Square Fire Pit Cover
Best for: Owners of a square gas fire table up to 28 inches wide who want listed options for securing the cover. The dimensions are 28 x 28 x 25 inches, making this a smaller square choice than the QH.HOME cover.
Saking describes its cover as high-density Oxford fabric with a silver-plated undercoating and waterproof PU layer. The listing says these materials are intended to resist rain, snow, dust, and UV exposure. For windy patios, the cover includes two buckle straps on diagonal sides to attach around fire pit legs, plus a drawstring at the hem for a closer fit.
Why it was selected: It combines a specific 28-inch square size with multiple listed securing features. Choose this model over a larger cover when a more compact fit is appropriate and your table’s height is no more than the stated 25 inches.
Limitation: It is not the right listed size for larger square or rectangular fire tables. Check whether your fire pit has legs that allow the buckle straps to be attached as described.
Square Fire Pit Cover For Smaller Tables
Best for: Buyers considering a cover for a smaller square fire pit, provided they verify the actual measurements against the listing. Its description says it can cover many 20-, 22-, 24-, 26-, and 28-inch square pits, while also giving a size of up to 32 x 24 inches.
The cover is described as heavy-duty Oxford cloth with thick PVC coating. The listing highlights waterproof and dustproof protection, along with resistance to UV exposure and tearing. These features may suit a buyer seeking a general outdoor cover for a square fire table and wanting protection from dirt and precipitation.
Why it was selected: Its stated range may cover several compact square fire pit sizes, giving it a different fit target from the 32-inch QH.HOME model and 28-inch Saking cover. Compare the listed maximum dimensions with the fire pit’s top and height before deciding.
Limitation: The size description is not fully consistent: it mentions a 32 x 24-inch maximum and also several square sizes. Confirm the exact fit with the seller or product details before purchase, especially if your table is close to the stated limits.
DORAHUA Upright Outdoor Fireplace Cover
Best for: Owners of an upright patio fireplace who need a tall cover, not buyers looking for a standard square or rectangular fire table cover. The listed size is 36 inches wide, 25 inches long, and 57 inches high. The product description specifies upright patio wood-burning fireplaces, so it is a distinct fit category within this selection.
The cover uses gray 600D waterproof Oxford cloth. Its listing describes protection from dust, sun, rain, and snow. It also has front and back double-opening zippers. The cover can be rolled up and secured with internal carabiner webbing, and the back can be rolled up for ventilation, according to the product details.
Why it was selected: This is the only tall, upright fireplace cover among the options. It may suit buyers whose outdoor fireplace is shaped like a standing unit rather than a low fire table.
Limitation: The product is described for wood-burning upright fireplaces, not specifically gas fire tables. Do not choose it for a gas appliance unless its shape and dimensions match and the manufacturer’s instructions allow this type of cover.
Zettum 48-Inch Rectangular Fire Pit Cover
Best for: Owners of rectangular fire tables measuring about 45 to 48 inches long, up to 28 inches wide and 24 inches high. The cover measures 48 x 28 x 24 inches. It is the rectangular alternative to the square covers in this group.
Zettum lists 600D Oxford cloth with PU coating as its material. The product description says the fabric is waterproof, weather resistant, and more breathable and softer than PVC-type cover material. It also describes protection from sunlight, rain, snow, wind, dust, leaves, and other debris. These details make it a candidate for a rectangular table exposed to varied outdoor conditions.
Why it was selected: Its dimensions and shape are clearly specified, and the listing covers a broad set of outdoor debris and weather concerns. Choose it if your fire table is rectangular and fits within the stated size range.
Limitation: This cover is not sized for square tables or rectangular tables longer than 48 inches. Measure all sides and height; a cover that is too tight or too loose may not provide the intended coverage.
Buying Guide: How To Choose An Outdoor Gas Fireplace Cover
What measurements should you take?
Measure the fire table’s length, width, and height at its widest and tallest points. For a square table, check both sides rather than assuming they are identical. Include fixed edges or protrusions that the cover must pass over. Compare your measurements with the cover’s stated dimensions and fit range, and allow for any design details that could affect how the cover sits.
Do not select a cover based on the fire pit’s advertised size alone. A model described as a 28-inch fire table may have dimensions that differ from its nominal label. The product details here provide different maximum heights, widths, and shapes, so compare each measurement individually.
Should you choose square, rectangular, or upright coverage?
Match the cover shape to the appliance. QH.HOME, Saking, and the third square cover are aimed at square fire pits, although their sizes and descriptions differ. Zettum is designed for a rectangular fire table. DORAHUA is a tall upright fireplace cover, and its listing identifies wood-burning patio fireplaces rather than gas fire tables.
For a rectangular unit, do not assume a square cover will fit because one measurement is similar. The dimensions and corners may prevent full coverage. Likewise, an upright fireplace needs a cover with enough height and a shape suited to its body.
Which material and weather features matter?
Check the material and coating information alongside your local conditions. The listed covers use Oxford fabric, with details such as 600D construction, PU or PVC coating, waterproof layers, or heat-sealed tape varying by model. Product descriptions also mention protection from conditions such as rain, snow, dust, sunlight, and debris. Treat these as manufacturer-listed features, not a substitute for checking the cover’s fit and care instructions.
Breathability may also matter when a covered appliance is stored outdoors. Zettum describes its PU-coated fabric as more breathable than PVC-type covers. DORAHUA describes a roll-up back section for ventilation. Compare these features with how and where you store the fireplace.
How important are straps, drawstrings, and access?
On a windy patio, securing features can help keep a cover in place. Saking lists two buckle straps intended to fasten around fire pit legs and a drawstring at the hem. The other product descriptions do not specify the same fastening setup, so do not assume they include straps or a drawcord.
Consider access needs as well. DORAHUA lists double-opening zippers and roll-up sections for a tall upright fireplace. This design differs from a simple fire table cover. Before covering or uncovering any gas appliance, follow the fireplace maker’s instructions, including guidance about when it is safe to cover the unit.
What should you prioritize for your setup?
- For a square table around 29 to 32 inches: Compare the table’s height with QH.HOME’s 32 x 32 x 24-inch dimensions.
- For a square table up to 28 inches: Check Saking’s 28 x 28 x 25-inch size and whether its straps can attach to the legs.
- For a rectangular table around 45 to 48 inches: Compare the table with Zettum’s 48 x 28 x 24-inch dimensions.
- For a smaller square table: Verify the third cover’s measurements carefully because its size description gives multiple fit references.
- For a tall, upright fireplace: Consider DORAHUA only if the shape and intended appliance type match its listed use.
Frequently Asked Questions
Can I use any outdoor fire pit cover on a gas fireplace?
No. The cover must match the fireplace’s shape and dimensions, and you should follow the appliance manufacturer’s instructions. A tabletop fire pit cover is not automatically suitable for an upright fireplace.
How do I know whether a square cover will fit?
Measure the fire table’s length, width, and height, then compare all three measurements with the cover’s dimensions and stated fit range. Check for edges or protrusions that could affect the fit.
Is a waterproof cover enough for a windy patio?
Water resistance and wind retention are different considerations. Saking specifically lists buckle straps and a drawstring. Check each product’s listed securing features rather than assuming every cover attaches in the same way.
Can I cover a fire pit while it is still hot?
Do not assume a cover is safe to place on a hot appliance. Follow the fire pit manufacturer’s instructions about shutdown and cooling before covering it.
Which option is intended for a rectangular fire table?
Zettum is the rectangular option in this selection. Its stated dimensions are 48 x 28 x 24 inches, and the listing says it is designed for many fire pits measuring 45 to 48 inches long.
Is the DORAHUA cover designed specifically for gas fire tables?
No. Its listing describes a cover for upright patio wood-burning fireplaces. Consider it only if your appliance’s design and measurements match, and its manufacturer permits the cover.