Converting a gas fireplace from a standing pilot to electronic ignition usually requires a compatible ignition system, not just a replacement pilot assembly. The 24-inch 350-P assemblies are options for certain 6003-series valves; the Durablow module is a control-module replacement, and the 48-inch assembly suits installations that need longer leads. Verify the fireplace and valve model before buying, and have a qualified gas-fireplace technician assess whether a conversion is approved for your appliance.
| Product | Best suited for | Key detail |
|---|---|---|
| 24-Inch 350-P for 6003 Series | Matching 6003-series valve setups | 24-inch assembly; natural gas |
| Durablow IPI Control Module | Replacing a compatible IPI module | 3-volt module with listed cross-references |
| Hearth Products Controls 350-P, 24-Inch | Matching electronic ignition valve | 24-inch leads |
| MCAMPAS 3V 350-P Assembly | Listed Dexen or Real Fyre valve systems | 24-inch leads; 3-volt ignition |
| Hearth Products Controls, 48-Inch | Compatible 6003-series setups needing reach | 48-inch leads |
24-Inch 350-P Pilot Assembly for 6003 Valves
This natural-gas electronic IPI pilot assembly is described for use with 6003-series spark-to-pilot gas valves. It has a 24-inch lead and is intended to connect the pilot assembly with a compatible gas valve. The listing says to follow the manufacturer’s installation instructions and applicable local codes.
Best for: Owners or technicians whose existing fireplace uses the specified 6003-series valve and requires a 24-inch assembly. It was selected because the listed valve family and lead length make its intended application relatively clear.
Limitation: This is a pilot assembly, not a complete conversion kit. The listing specifies natural gas, so do not assume it is suitable for propane or for a fireplace with a different valve or ignition control.
Durablow IPI Electronic Ignition Control Module
This Durablow item is a control module rather than a pilot assembly. Its listing identifies a 3-volt input and intermittent-pilot operation for natural-gas and propane fireplaces. It also provides a long set of OEM and part-number cross-references, including 593-592, GM-6KA, 350-M, IPI-6000, and several fireplace-system references.
Best for: Buyers replacing a failed module when the existing part number and fireplace system match the listing’s cross-references. It was selected because it addresses the electronic control component that may be needed in an existing IPI system.
Limitation: A matching-looking module is not proof of compatibility. The listing advises checking that the old module is defective; confirm the exact part number and system requirements before ordering. It does not, by itself, convert a standing-pilot fireplace.
Hearth Products Controls 350-P, 24-Inch
This Hearth Products Controls assembly is described as a pilot for an electronic-ignition gas valve. The supplied product details specify 24-inch leads but do not provide a valve model, fuel type, or additional cross-reference information.
Best for: A buyer who has confirmed that the fireplace’s electronic ignition valve calls for this 350-P assembly and that 24-inch leads are appropriate. It was selected as a straightforward assembly option with a stated lead length.
Limitation: The available details are sparse. Do not use the product name alone to determine valve fit, fuel compatibility, or suitability for a standing-pilot conversion. Confirm the manufacturer’s parts list or consult a qualified technician.
MCAMPAS 3V 350-P Pilot Assembly, 24-Inch
The MCAMPAS assembly is described as a 3-volt electronic-ignition pilot with 24-inch leads for both the pilot tube and wires. Its listing names Dexen 6003-series spark-to-pilot valves and Real Fyre EPK-01, EPK-01P, EPK-02, and EPK-02P valves as compatible systems.
Best for: A buyer with one of the specifically listed valve systems who needs a 24-inch pilot assembly. It was selected for its stated valve references and the inclusion of both lead and tube length information.
Limitation: The product description’s energy-efficiency and safety language does not establish suitability for every fireplace. Verify the appliance model, fuel, valve, and required ignition components before treating it as a conversion solution.
Hearth Products Controls 350-P, 48-Inch
This Hearth Products Controls pilot assembly is listed for use with a Dexen 6003-series gas valve and has 48-inch leads. Its product details also describe it for natural-vent, modern, outdoor, and commercial or hospitality applications, but those descriptors do not replace checking the exact appliance specification.
Best for: A compatible 6003-series setup where the required pilot assembly needs longer leads than a 24-inch option provides. It was selected to give buyers a longer-lead alternative within the listed valve family.
Limitation: A longer lead does not make the assembly universally compatible. Confirm the manufacturer’s specified part, installation layout, and fuel type; the available details identify natural gas, not propane.
Buying Guide: What to Check Before Changing Ignition Systems
Does a pilot assembly convert a fireplace by itself?
Usually, no. A pilot assembly is one component of an ignition arrangement. An electronic ignition system may also depend on a compatible gas valve, control module, wiring, switches, power source, and appliance-specific safety controls. These products are described as replacement parts for electronic ignition systems; their listings do not establish that any one item is a complete conversion kit.
Before ordering, identify whether the fireplace already has an intermittent-pilot ignition system with a failed component or whether it has a standing pilot that you want to replace. Replacing a failed part in an existing IPI system is different from retrofitting an appliance that was designed for a standing pilot. A conversion should only proceed if the appliance manufacturer permits it and the correct components are specified.
How can you check compatibility?
Find the fireplace’s rating plate and installation or service manual. Record the appliance model, fuel type, valve manufacturer and model, and part number printed on the existing ignition components. Compare those details with the replacement listing and the manufacturer’s parts documentation. A product title or broad list of fireplace brands is not enough to confirm a match.
- Match the exact valve series or part number, such as a listed 6003-series valve.
- Confirm whether the fireplace uses natural gas or propane. Do not assume a natural-gas part is suitable for propane.
- Check the ignition type and electrical requirements. The Durablow module listing specifies 3 volts; that does not mean it fits every 3-volt system.
- Check whether the part is a pilot assembly, a control module, or another component. These parts have different roles.
- Confirm lead length and routing needs without stretching, splicing, or modifying components unless the manufacturer expressly allows it.
Should you choose a 24-inch or 48-inch assembly?
Choose the length specified by the fireplace manufacturer or service documentation. The listed 24-inch options may suit an installation designed for that reach, while the Hearth Products Controls 48-inch option is listed for a 6003-series valve and provides longer leads. More length is not automatically better: the pilot tube and wires must be routed as the appliance was designed, clear of heat and moving parts.
Do not select a longer assembly solely because it appears easier to route. Confirm that the specific model is approved for the fireplace and that the lead arrangement matches the original component. If the appliance documentation does not specify a length, ask a technician to identify the correct part.
When is a control module the right purchase?
A control module is a candidate when the appliance already has a compatible electronic ignition system and the module has been diagnosed as defective. Match the old module’s part number, voltage, ignition type, and wiring configuration against the replacement details. The Durablow listing includes several cross-reference numbers, but buyers still need to verify that one applies to their fireplace.
A module does not replace the pilot assembly or gas valve unless the appliance’s parts specification says that it does. If the fireplace has a standing pilot and no IPI controls, purchasing an IPI module alone is not a complete way to convert it.
When should a professional handle the work?
Gas fireplace work can involve fuel connections, electrical controls, flame sensing, venting, and appliance safety devices. Have a qualified gas-fireplace technician determine whether a conversion is allowed, select the correct components, install them according to the appliance instructions, and verify safe operation. Local codes may also apply. Do not bypass safety controls or alter gas components to make a part fit.
If you are replacing a component in an existing system, a technician can also distinguish a failed pilot assembly from a faulty module, valve, wiring connection, or switch. Replacing the wrong part can leave the fireplace inoperative and may create a safety hazard.
Frequently Asked Questions
Can I convert any gas fireplace to electronic ignition?
No. Conversion depends on the fireplace design, manufacturer instructions, available approved components, and local requirements. Confirm that the appliance is approved for the conversion before buying parts.
Is an electronic ignition pilot assembly a complete kit?
Not based on the product details provided here. The listed pilot assemblies are components, and the Durablow product is a control module. A complete system may require additional appliance-specific parts.
What does 350-P mean?
In these product listings, 350-P identifies a pilot assembly model or type. The name alone does not confirm that it fits a particular fireplace; check the valve and appliance documentation.
Can a natural-gas pilot assembly be used with propane?
Do not assume so. The first, third, and fifth products are described for natural gas, while the MCAMPAS listing specifies valve compatibility but does not clearly establish fuel compatibility in the supplied details. Confirm the required fuel specification with the appliance manufacturer.
How do I know whether the module or pilot assembly has failed?
Use the fireplace service manual and have a qualified technician diagnose the system. The Durablow listing specifically recommends checking that the old module is defective before ordering; symptoms alone may not identify the failed component.
Is a 48-inch lead automatically a better choice than a 24-inch lead?
No. Use the length specified for the fireplace and valve arrangement. The correct assembly is determined by the manufacturer’s part requirements, not by choosing the longest available option.