The best cast iron wood stove leg depends on your stove’s make, model, and part number. The US Stove 40817 replacement is listed for select US Stove models, while the BX26E and BX42E legs are specified for particular Vogelzang stoves. The Midwest Hearth leg is for older Vermont Castings Dutchwest models, and the US Stove 40566 is a separate replacement with a listed leveler bolt. Confirm the model and existing part number before choosing; similar-looking legs are not necessarily interchangeable.
| Product | Best For | Key Detail |
|---|---|---|
| US1269E & 1261 replacement leg | Select US Stove Logwood models | 8 inches tall; replaces 40817 and 40318 |
| BX26E replacement leg | Vogelzang BX26E | 8 inches tall; replaces 40817 and 40318 |
| Midwest Hearth 7000016A | Older Dutchwest stoves | Fits models made before February 2012 |
| BX42E replacement leg | Vogelzang BX42E | Listed as replacement part 40790 |
| US Stove 40566 | Buyers matching that part number | Includes a leveler bolt |
US1269E And 1261 Cast Iron Leg
This Stove Parts 4 Less replacement is specified for the US Stove Company 1261 Logwood, 1269E Logwood, and US1269E. Its listed compatibility also includes replacement part numbers 40817 and 40318. The leg is described as 8 inches tall.
Best for: Owners of one of the named US Stove models who need a leg matching part 40817 or 40318. It is a more targeted choice than a generic cast iron leg because the listing identifies specific stove models and replacement numbers.
Check before ordering: Confirm the model designation and existing part number against your stove documentation or the removed component. The listing does not provide hardware details, dimensions beyond the 8-inch height, or broader compatibility. Avoid choosing it solely because another stove leg has a similar appearance.
Vogelzang BX26E Cast Iron Leg
This Stove Parts 4 Less leg is listed for the Vogelzang BX26E. The product information identifies it as a replacement for part numbers 40817 and 40318 and gives its height as 8 inches.
Best for: Buyers who have a Vogelzang BX26E and need a replacement associated with one of those listed part numbers. The model-specific fit information makes it a clearer match for that stove than a leg listed for a different Vogelzang model.
Check before ordering: Verify that the stove is the BX26E and compare the old part number where possible. Although this and the US Stove replacement above share listed replacement numbers and height, the product listings name different stove models. Do not assume the two listings are interchangeable across brands or models without confirmation.
Midwest Hearth 7000016A Dutchwest Leg
Midwest Hearth identifies this painted-black cast iron leg for Vermont Castings Dutchwest models manufactured before February 2012. The listing explicitly warns that the part will not fit Dutchwest stoves built after that date. It is sold as the leg only, with no hardware included.
Best for: Owners who have confirmed that their Dutchwest model was manufactured before February 2012 and need this specific replacement leg. The date cutoff is an important fit detail that separates it from the other options in this guide.
Check before ordering: Confirm the stove’s manufacturing date and whether the required hardware is already available. If the stove was made after February 2012, the listing says this part will not fit. The product details do not state dimensions or include installation hardware.
Vogelzang BX42E Cast Iron Leg
This Stove Parts 4 Less replacement is specified for the Vogelzang BX42E and is listed as compatible with replacement part number 40790. The provided product information does not give a leg height, finish, or hardware details.
Best for: Buyers repairing a Vogelzang BX42E who have confirmed that part 40790 is the relevant replacement. Its model and part-number references distinguish it from the BX26E leg, which is listed for another Vogelzang model and different replacement numbers.
Check before ordering: The listing supplies less dimensional information than some alternatives in this group. Verify the stove model and part number before purchase, and check whether any needed fasteners are included rather than assuming they come with the leg.
US Stove 40566 Leg With Leveler Bolt
This replacement leg is identified as US Stove part 40566. The product name describes it as cast iron and specifies that it comes with a leveler bolt. The listed dimensions are 10¾ by 5⅛ by 3½ inches.
Best for: Buyers whose stove documentation or existing component identifies part 40566, especially when the leveler bolt is relevant to the replacement. The stated dimensions provide extra information for comparison with a removed leg.
Check before ordering: The supplied product details do not identify compatible stove models beyond the US Stove Company brand. Confirm the part number and dimensions against your stove before buying. Do not treat the presence of a leveler bolt as proof that the leg fits a particular model.
Buying Guide: How To Choose Wood Stove Legs
How do I find the correct replacement leg?
Start with the stove’s manufacturer and exact model number. Look for a model label or consult the stove’s documentation. Then compare the existing leg or parts list with the replacement part number in the product details. A brand match alone is not enough: these listings identify different model-specific applications, including the Vogelzang BX26E and BX42E.
If the old leg is still available, note its markings and measurements before removing or discarding it. Compare those details with the replacement listing. If the model or part number is unclear, ask the manufacturer or a qualified stove-parts seller to confirm fit rather than relying on appearance alone.
Should I choose by height or by part number?
Use the part number and stove model as your primary checks. Height is useful as a secondary comparison, but it does not establish that the mounting points or overall shape match. Two products may share an 8-inch height or replacement number while being listed for different stove models. Confirm all available identifiers before treating parts as interchangeable.
The US1269E and 1261 leg and the BX26E leg are both listed as 8 inches tall and refer to replacement numbers 40817 and 40318. Their specified stove models differ, so those shared details should not replace a model fit check.
What should I know about manufacture dates?
Some replacement parts apply only to a production period. The Midwest Hearth 7000016A listing specifies Dutchwest models manufactured before February 2012 and says it will not fit models made after that date. Check the stove’s production information before selecting this part. If you cannot determine the date, confirm it with the stove manufacturer or a knowledgeable parts source.
Do replacement legs include hardware?
Check each listing separately. The Midwest Hearth Dutchwest leg is explicitly sold without hardware. The other product details provided here do not specify whether hardware is included, so do not assume that fasteners or other pieces come with those legs. Confirm the package contents before ordering, especially if the old hardware is missing or damaged.
When does a leveler bolt matter?
The US Stove 40566 product name specifically says it includes a leveler bolt. If your replacement needs to match that part, compare the part number and dimensions and verify the stove application. The other listed products do not describe a leveler bolt in their supplied features, so check their individual package details if that component is required.
What measurements should I compare?
Compare the leg’s overall dimensions and the mounting arrangement with the old part or manufacturer documentation. Among these options, the 8-inch height is stated for the US1269E and 1261 replacement and the BX26E replacement. The US Stove 40566 has listed dimensions of 10¾ by 5⅛ by 3½ inches. The other listings do not provide enough dimensions here for a complete measurement comparison.
Measurements can help identify a mismatch, but they do not verify every fit detail. Do not force a leg into place if its attachment points do not align. Follow the stove manufacturer’s guidance for replacement and installation.
How should I compare these five options?
- For US Stove 1261 Logwood, 1269E Logwood, or US1269E: Check the leg listed for those models and part numbers 40817 or 40318.
- For Vogelzang BX26E: Choose the listing that names the BX26E and replacement numbers 40817 and 40318.
- For Vogelzang BX42E: Check the leg listed for that model and part number 40790.
- For older Vermont Castings Dutchwest: Verify that the stove was made before February 2012 and account for hardware being excluded.
- For US Stove part 40566: Match the part number and listed dimensions; the product name includes a leveler bolt.
These comparisons reflect the product information supplied for each item. They do not establish additional fit across models or brands. When the stove’s identity or part number cannot be confirmed, pause the purchase and seek a model-specific answer.
Frequently Asked Questions
Are cast iron wood stove legs interchangeable?
Not necessarily. The listings specify different stove models and part numbers. Confirm the exact model and replacement number rather than assuming that legs with similar materials or dimensions will fit.
Which listed leg fits a Vogelzang BX26E?
The Stove Parts 4 Less BX26E leg is listed for the Vogelzang BX26E and as a replacement for part numbers 40817 and 40318.
Which Dutchwest models fit the Midwest Hearth 7000016A?
The listing specifies Vermont Castings Dutchwest models manufactured before February 2012. It says the leg will not fit models made after that date.
Does the Midwest Hearth leg include installation hardware?
No. Its product details state that the listing is for the leg only and that no hardware is included.
Which option includes a leveler bolt?
The US Stove 40566 product name identifies a cast iron replacement leg with a leveler bolt. Confirm that 40566 is the correct part for your stove before ordering.
What if I cannot find my stove’s model number?
Check the stove label and owner documentation, or ask the manufacturer or a qualified parts seller to identify the model. Do not choose a replacement based only on the leg’s appearance.