These five listings cover replacement shaker grates, heat recovery, draft control, and coal for wood-and-coal heating systems; none is a complete furnace. The Criditpid kit is best for owners of specifically listed stove models who need grate parts. The US Stove heat reclaimer is for buyers seeking heat circulation, while the 6-inch regulator is for systems requiring draft control. The coal listings suit buyers whose appliances are designed for the offered fuel.
| Product | Best suited for | Key detail |
|---|---|---|
| Criditpid Shaker Grate Frame Kit | Owners of listed US Stove or Vogelzang models | Includes four cast-iron pieces |
| US Stove Miracle Heat Reclaimer | Wood- or coal-stove owners considering heat recovery | 100 CFM fan |
| Blacksmithing and Heating Coal | Buyers seeking a 25-pound coal listing | Fuel details are limited |
| Beautiful Clean Coal Anthracite Mix | Anthracite-stove owners checking stove and nut sizes | 25-pound mixed-size coal |
| 6-Inch RC Barometric Draft Control | Systems requiring a 6-inch draft regulator | Stated adjustment range of .02 to .08 inches water column |
Criditpid Shaker Grate Frame Kit
This replacement kit includes two 40257 shaker grates and two 40256 shaker grate frames. The listed parts are cast iron, and the product identifies Johnson, US Stove, and Vogelzang part numbers 40256 and 40257.
Best for: Owners of compatible US Stove or Vogelzang wood-and-coal furnaces who need to replace the grate and frame components together. The listing names US Stove models including Hot Blast 1300, 1357M, 1500, 1537G, 1537M, and 1557M, as well as Ashley 22AF and Clayton 1537Q. It also lists Vogelzang Norseman 1500 and 2500 models.
It was selected because it is a model-specific repair part rather than a general furnace accessory. Confirm the appliance model and part numbers before ordering; a similar-looking grate may not match a different furnace.
Limitation: Compatibility is limited to the models and part numbers identified in the listing. Check your furnace documentation if its model is not listed.
US Stove Miracle Heat Reclaimer
The US Stove MH6-6 Miracle Heat Reclaimer is described as a wood-stove connector with a 100 CFM fan. The listing says it circulates heat and has a heat-recovery output intended to recover heat that would otherwise be lost. It also describes the design as intended to minimize creosote and soot formation.
Best for: Buyers considering a heat-recovery accessory for a compatible wood- or coal-burning setup. It is a different kind of purchase from a replacement grate or a supply of fuel: its listed purpose is moving and recovering heat through a connector.
Choose this if heat circulation and recovery are priorities, and verify that the unit’s dimensions and installation requirements suit your appliance and venting arrangement before purchase. The product information supplied here does not specify connector dimensions or installation instructions.
Limitation: The 100 CFM figure describes the fan, but the listing does not provide enough information here to determine the heat output or expected savings for a particular home. Do not treat the stated creosote-related design goal as a substitute for regular chimney and stove maintenance.
Blacksmithing And Heating Coal, 25 Pounds
This listing is titled “Blacksmithing and Heating Coal” and identifies a 25-pound quantity. The supplied product details do not specify coal type, size, grade, or which furnace models can use it. Those details matter because wood-and-coal appliances can have fuel requirements that differ by design.
Best for: Buyers who are specifically looking for a small listed quantity of coal and can confirm the fuel is appropriate for their appliance. It was included as a fuel option, not as a furnace part or a complete heating system.
Before choosing it for home heating, check the product listing for the fuel’s type and sizing information, then compare those details with the furnace manufacturer’s instructions. If the information is not available, ask the seller rather than assuming that “heating coal” means it will work in every coal furnace.
Limitation: The provided listing information does not identify the coal type or size. That makes it harder to compare with the anthracite mix below or to confirm compatibility with a particular stove.
Beautiful Clean Coal Anthracite Mix
This 25-pound product is described as a mix of anthracite stove coal and nut coal. The listing says it is intended for coal stoves, furnaces, and other coal-burning appliances, but it also cautions that anthracite burns properly only in appliances designed for anthracite fuel.
Best for: Owners of an anthracite-compatible coal stove or furnace who want a mixed-size supply. The stove-and-nut combination is the main distinction from a listing that does not specify fuel type or size.
Check your appliance manual or ask the manufacturer which coal sizes it accepts before ordering. The listing itself advises buyers to confirm compatible fuel and size with the stove manufacturer. This product is not a general-purpose fuel for wood-only appliances or for every coal-burning system.
Limitation: The mixed sizes may not suit an appliance that calls for a single specified coal size. Confirm the manufacturer’s requirements rather than assuming a mix will feed or burn correctly.
6-Inch RC Barometric Draft Control
This 6-inch RC draft regulator is listed for oil, wood, or coal heating systems and residential or commercial applications. Its stated adjustment range is .02 to .08 inches water column. The product description specifies aluminum and steel construction and says setup should use instrumentation to match the heating system’s requirements.
Best for: Buyers who have confirmed that their furnace or boiler requires a 6-inch barometric draft control and whose manufacturer’s specifications call for a regulator in the stated range. It was selected because it addresses draft management, a different need from fuel selection or grate replacement.
Compare the appliance’s specified draft setting, vent dimensions, and installation requirements with the product information before choosing it. The listing says the control is factory-calibrated for adjustment, but also recommends measurement during setup.
Limitation: The 6-inch diameter and stated operating range do not establish compatibility with every system. Correct draft setup is safety- and appliance-specific; use a qualified heating professional if you are unsure how to install or adjust it.
Buying Guide: How To Choose Wood And Coal Furnace Products
Start by identifying what you are actually buying. The five products above are accessories, replacement parts, or fuel; none is a complete wood-and-coal furnace. If you need a full heating appliance, compare furnace models separately and use their installation manuals and fuel specifications.
Do you need a repair part, an accessory, or fuel?
A shaker grate kit is a replacement component for a listed set of furnace models. A heat reclaimer and a draft regulator are system accessories with different purposes: one is described as circulating and recovering heat, while the other is intended to regulate draft. Coal is consumable fuel, so its type and size must match the appliance. Establishing the category first prevents comparing products that solve different problems.
How should you check replacement-part compatibility?
Use the furnace’s model and the part number, not appearance alone. The Criditpid kit identifies part numbers 40256 and 40257 and names specific US Stove, Ashley, Clayton, and Vogelzang models. Compare your appliance’s identification plate and manual with that list. If a model is missing or a part number differs, confirm fit with the manufacturer or seller before ordering.
What should you check before buying coal?
Confirm the fuel type and size required by the furnace. The anthracite mix listing specifically warns that anthracite needs an appliance designed for anthracite and asks buyers to check stove requirements. The Blacksmithing and Heating Coal listing supplied here does not identify its type or size, so it offers less information for a compatibility decision. Avoid relying on a broad product title when the manual specifies a particular fuel.
How do heat reclaimers and draft controls differ?
A heat reclaimer is described as using a 100 CFM fan to circulate heat and recover heat through a stove connector. A barometric draft control is intended to manage draft pressure and has a stated range of .02 to .08 inches water column. They are not interchangeable. Check the appliance and venting specifications to determine whether either device is appropriate; do not assume that adding an accessory will improve every system.
Which measurements and setup details matter?
For the draft control, verify the 6-inch diameter and the required draft range against the system documentation. The product listing recommends using instrumentation during setup. For the heat reclaimer, the supplied details do not state connector dimensions, so confirm fit and installation requirements separately. For fuel and grates, model, size, and fuel specifications are more important than broad labels such as “wood and coal.”
When should you ask a professional?
Get qualified help when a product affects venting, draft, combustion, or a furnace repair you cannot verify. A professional can compare the appliance’s requirements with the regulator or connector and assess setup. Follow the furnace manufacturer’s maintenance and operating instructions, and do not treat an accessory’s stated purpose as a guarantee of safer operation or lower fuel use.
Frequently Asked Questions
Are these products complete wood-and-coal furnaces?
No. The listings cover replacement grates, a heat reclaimer, two coal products, and a draft control. They do not include a complete furnace.
Will the Criditpid grate kit fit any wood-and-coal furnace?
No. The listing names specific US Stove, Ashley, Clayton, and Vogelzang models and part numbers 40256 and 40257. Confirm your exact model and part numbers before ordering.
Can anthracite coal be used in any wood stove?
No. The anthracite listing says it should be used only in stoves designed for anthracite. Check the appliance manufacturer’s fuel and size requirements.
What is the stated capacity of the US Stove heat reclaimer’s fan?
The product listing specifies a 100 CFM fan. It does not provide enough information here to calculate heat output or savings for a particular installation.
What does the 6-inch draft control’s range mean?
The listing states an adjustment range of .02 to .08 inches water column. The correct setting depends on the heating system, so compare it with manufacturer specifications and use appropriate measurement during setup.
Which coal listing provides clearer fuel information?
The Beautiful Clean Coal listing identifies its product as a 25-pound anthracite mix of stove and nut sizes. The Blacksmithing and Heating Coal details provided here do not specify coal type or size.